C-27A Spartan - Poser
Created by: Vanishing Point
File Size: 6mb
The C-27A Spartan is a twin turboprop engine aircraft designed to meet Air Force requirements for a rugged, medium size air and land transport. The aircraft is particularly suited for short-to-medium range tactical operations into semi-prepared airfields as short as 1,800 feet. The C-27A is an all-weather, day/night transport with capabilities to perform medical evacuation missions. It can carry 24 litters and four medical attendants, or 34 ground troops. The Spartan has a cargo capacity of more than 2,000 cubic feet, or 12,000 pounds. The C-27A operates with a three person crew of aircraft commander, copilot and loadmaster. The Air Force C-27A fleet consists of 10 aircraft stationed with the 24th Wing at Howard AFB, Panama, and flown by aircrews from 310th Airlift Squadron.
Crew: Minimum two: pilot, co-pilot, (plus loadmaster when needed)
Capacity: 60 troops or 46 paratroops or 36 litters with 6 medical personnel
Payload: 11,500 kg (25,353 lb)
Length: 22.7 m (74 ft 6 in)
Wingspan: 28.7 m (94 ft 2 in)
Height: 9.64 m (31 ft 8 in)
Wing area: 82 m2 (880 sq ft)
Empty weight: 17,000 kg (37,479 lb)
Max takeoff weight: 30,500 kg (67,241 lb)
Powerplant: 2 × Rolls-Royce AE2100-D2A turboprop, 3,460 kW (4,640 hp) each
Propellers: 6-bladed Dowty Propeller 391/6-132-F/10, 4.15 m (13 ft 7 in) diameter
Maximum speed: 602 km/h (374 mph; 325 kn)
Cruising speed: 583 km/h (362 mph; 315 kn)
Minimum control speed: 194 km/h; 121 mph (105 kn)
Range: 1,852 km (1,151 mi; 1,000 nmi) with 10,000 kilograms (22,000 lb) payload
Range at 6,000 kg payload: 4,260 km (2,650 mi; 2,300 nmi)
Ferry range: 5,926 km (3,682 mi; 3,200 nmi)
Service ceiling: 9,144 m (30,000 ft)
.: Product Features :.
Poser figure: obj, cr2/ png.
Tail rudder can rotate (with an ERC dial on the BODY).
Left and right propellers can rotate (with an ERC dial on the BODY).
Landing gear wheels can raise up and down.
Landing gear doors can open and close.
-An ERC dial on the BODY controls both the landing gear wheels and landing gear doors.
Three sets of left and right wing flaps can rotate up and down.
-An ERC dial on the BODY raises or lowers the flaps.
-A second ERC dial on the BODY raises or lowers the flaps opposite each other for banking turns.
Rear cargo door can open and close (with an ERC dial on the BODY).
Includes an interior cargo bay (with texture maps).
Includes a basic cockpit which can be seen through the windows.
-Note: The cockpit wasn't designed for interior shots.
Blade Blur: replaces the left and right propellers with a blurred prop to simulate the spinning of the blades.
-The Blade Blur is built into the model`s geometry so there`s no need to load a separate prop from the props folder.
-The rotation of the Blade Blur props are controlled by the same ERC dial that controls the rotation of the main propellers.
The side doors do not open.
.: Poses :.
Hide/ show blade blur.
.: Textures/ MAT Poses :.
Gray (US Air Force)
Yellow and Red (Canadian Air Force)
Templates for all materials are included.
Note: The insignia and unit markings are created by using a texture and transparency map- this allows you to change the markings without changing the base texture.
Although this model was only tested in Poser, it uses texture maps (instead of procedural shader nodes), which means it should work fine in other software programs such as DAZ Studio.
This is the Poser Version
Additional Product Images:
|VP licence. A copy can be found here.